Specifications: |
HI
2300 |
|
EC |
TDS |
NaCl |
Temperature |
(Autoranging) |
(Autoranging) |
Range |
00.0
to 29.99 µS/cm |
0.00
to 14.99 ppm |
0.0
to 400.0 % |
0.0
to 60.0°C |
30.0 to 299.9 µS/cm |
15.0
to 149.9 ppm |
300 to 2999 µS/cm |
150
to 1499 ppm |
3.00 to 29.99 mS/cm |
1.50
to 14.99 g/L |
30.0 to 200.0 mS/cm |
15.0
to 100.0 g/L |
Up
to 500.0 mS/cm actual (*) Conductivity |
Up
to 400.0 g/L actual (*) TDS |
|
(with
0.80 factor) |
Resolution |
0.01
µS/cm (from 0.00 to 29.99 µS/cm) |
0.01
ppm (from 0.00 to 14.99 ppm) |
0.1
% |
0.1°C |
0.1 µS/cm (from 30.0 to 299.9 µS/cm) |
0.1
ppm (from 15.0 to 149.9 ppm) |
1 µS/cm (from 300 to 2999 µS/cm) |
1
ppm (from 150 to 1499 ppm) |
0.01 mS/cm (from 3.00 to 29.99 mS/cm) |
0.01
g/L (from 1.50 to 14.99 g/L) |
0.1
mS/cm (over 30.0 mS/cm) |
0.1
g/L (over 15.0 g/L) |
Accuracy |
±1%
of reading |
±1%
of reading |
±1%
of reading |
±0.4°C |
(@
20°C/68°F) |
±
(0.05 µS/cm or 1 digit, whichever greater) |
±
(0.03 ppm or 1 digit, whichever greater) |
Typical
EMC Deviation |
±1%
of reading |
±1%
of reading |
±1%
of reading |
±
0.1 °C |
Calibration |
1
point with 6 memorized buffers: |
|
1
point |
2
points |
84,
1413 ,5000,12880, 80000 or 111800 µS/cm |
with
HI 7037 buffer |
at
0 and 50°C |
|
(optional) |
(plus
± 1°C adjustment) |
Temp.
Compensation |
Automatic
or Manual from 0 to 60°C (can be disabled to measure
actual conductivity) |
Temp.
Coefficient |
0.00
to 6.00 %/°C (for EC and TDS only) Default value is
1.90%/°C |
TDS
Factor |
0.40
to 0.80 (default value is 0.50) |
Probe |
HI
76310 Platinum 4-ring probe, K=1 nominal and built-in
temperature sensor (included) |
GLP |
Storing
of last calibration data |
Serial
Interface |
RS232
- downloading of last calibration data |
Power
Supply |
12
VDC adapter (included) |
Auto
Off |
After
5 minutes (can be disabled) |
Casing |
IP
67 |
Environment |
32
to 122°F (0 to 50°C ); 95% RH non-condensing |
Dimensions |
9.5
x 7.2 x 2.9" (240 x 182 x 74 mm ) |
Weight |
2.6
lb . ( 1.2 Kg ) |
(*)
Actual conductivity (or TDS) is the non-temperature
compensated conductivity (or TDS) value of a solution. |