LABOMAR TEKNOLOJİK ÇÖZÜMLER

Tel : 0216 417 70 01 / Fax : 0216 417 33 50

 
 

www.labomar.net   /  webinfo@labomar.net  

 

 

 

ELECTRO THERMAL Marka, IA 9100 / 9200 Model 
Her İki model erime noktası tayin cihazı mikroprosesör kontrollü çalışıp aynı anda 3 numunenin eime noktasını tayin edebilmektedir.
Tuş takımı üzerinden erime noktası kaba taslak tahmin edilen maddeye göre başlangıç ısısı girilerek cihazın çabuk ısınması imkanı vardır.Girilen sıcaklık değerine ulaşıldıktan sonra sesli ve görsel sinyal alınır.Bu noktadan itibaren cihaz erime noktasının tam ve hassas tayini için sıcaklığı kademeli olarak artar.( IA 9100 modeli için 1 °C/dakika,IA 9200 modeli için 0,2-10 °C /dakika ayarlanabilir)
 IA 9200 Bilgisayar destekli data analizine izin vermektedir.Başlama sıcaklığı, sıcaklık artış hızı gibi değerler cihaza programlanabilmekte,ölçüm değerleri opsiyonel aksesuar olan printer ile Ölçüm sonuçları,analiz tarihi,analiz saati ve numune numarası raporlanabilmektedir.
TEKNİK ÖZELLİKLER
Ebadlar : 200 X 350 X 85 mm
Ağırlık : 2,5 Kg
Besleme : 220/240 V
  Genel Güç tüketimi : 45 W
Fırın Gücü : 18 W
Fırın aydınlatması : 12 V 2,2 W
Fırın Sıcaklık aralığı : 45 – 450 °C
Dijital Termometre 
Sensör : Liner platin
Ölçüm aralığı : Oda sıcaklığı – 400 °C
Hassasiyet : 0,1 °C 
Gösterge : 12 mm LCD Ekran 
Hafıza : 4 sıcaklı değeri


IA 9100 Model
IA 9200 Model

Aksesuarlar

Soğutucu
Toz örtüsü
Kapillar tüp 2,0 mm (2000 adet)
Printer (Kablosuyla birlikte)
Kalibrasyon kiti
Seri printerler için arabirim kablosu PRODUCT SPECIFICATIONS
•Adjustable extension arm facilitates comfortable viewing and helps reduce operator fatigue.
•The viewing head can be rotated for easier viewing and folds flat for easy and compact storage.
•Object lens can be adjusted to sharpen the focus on the sample.
•Safety eye piece reduces glare and protects your eyes from contact to the hot zone.
•Sample observation is enhanced by an integral light and an 8 x wide angle viewing magnifier which enables all three samples to be viewed.
•Digital microprocessor with 0.1°C resolution provides fast warm up, accurate temperature control and operates without the need for a mercury thermometer.
•Three audible beeps indicate when oven temperature has stabilized and it is time to place the sample in the oven.
•Simple push-button controls are conveniently located so you can easily record temperatures without looking away from the sample.
•Heating chamber consists of aluminum heating block which avoids the hazards and mess associated with oil baths.
•Models 9100, 9200 & 9300 are designed for determinations of melting points using glass capillary tubes. Model 9400 utilizes glass slides.
•Models 9100, 9200 & 9300 have a temperature range of ambient to 400°C. Model 9400 has a temperature range of -10° - 100°C.
•RS232 output connector allows interface with the PR2000B printer. (Models 9200, 9300 & 9400 only.)
•Units can be calibrated in the field or can be sent back to the manufacturer for calibration.

Model IA9100
•Records four discrete temperatures by simply pushing the "go-to" button.
•Unit comes with one fixed temperature ramp rate (1°C/min.).
•Fast Ramp Rate of 10°C/min. feature can be used if the melt temperature is unknown. This fast ramp feature can help to find an approximate measurement of melt temperature.
•Temperature data can be temporarily stored and recalled on the LCD display.

Model IA9200
•Records up to four discrete temperatures by simply pushing the "go-to" button.
•Five fixed temperature ramp rates (0.2, 0.5, 1.0, 2.0 and 3.0°C/min.).
•Programmable ramp rates from 0.2 to 10.0°C/min. in 0.1°C increments.
•Can store up to 1000 batches of data, which can be later recalled and viewed on the LCD display or can be printed. •Dates and time can be recorded or printed using the real time clock function.

Model IA9300
•Used for recording beginning and ending points (melting point ranges) of each of three samples.
•Features pre-programmed ramp rates of 1°C per minute.
•Programmable ramp rates from 0.2 to 10.0°C/min. in 0.1°C increments.
•Batch memory can store up to 500 sets of data, which can be later recalled on the LCD display or can be printed.
•Each set of data contains the beginning and ending points for each of the three samples.
•Dates and time can be recorded or printed using the real time clock function.
•LED indicator light identifies which of the three capillary tubes is being viewed on recorded.
•Conforms to U.S. Pharmacopeia requirements.

Model IA9400
•Used to test waxes, fats, grease oils, etc.
•Samples for test are located on a glass slide and placed in slide chamber.
•Temperature range of -10° to 100°C.
•Capable of holding a slide at temperatures down to 0°C.
•Features preprogrammed ramp rate of 1°C/min.
•Programmable ramp rates available from 0.2°C per minute to 10°C per minute.
•Temperature data can be temperarily stored and recalled later on the LCD display.
•Dates and time can be recorded or printed using real time clock function.Desc
Digital 9000 Series Melting Point