LABOMAR TEKNOLOJİK ÇÖZÜMLER

Tel : 0216 417 70 01 / Fax : 0216 417 33 50

 
 

www.labomar.net   /  webinfo@labomar.net  

<Aksesuarlara geri dön<

 

 

 

Brookfield Yüksek Basınç Rheometresi

High Pressure PVS Rheometer 

High Pressure PVS Rheometer

The PVS is a dynamic coaxial cylinder, controlled shear rate rheometer allowing quick and easy viscosity measurements under pressure at temperatures where sample boil-off is a problem.
The PVS can be used to simulate process conditions for small fluid samples in a laboratory benchtop environment. Applications include chemical compounds containing volatile materials, oil industry, drilling muds and fracturing fluids, processed foods, polymers and paints. Any test sample requiring absolute viscosity measurement under totally enclosed conditions is a viable candidate.

  • Portable site-to-site mobility

  • Designed to operate in severe environments

  • Quick and easy to operate

  • Measures samples at high pressure upt to 1000 psi

    • Safety relief valve included

  • Measures under extreme temperature conditions: -40°C to +200°C

    • RTD temperature sensor on the inner cylnider surface insures accurate sample temperature

  • Simulation of In-Process conditions

    • Down Hole

    • Cooking

    • Blending

    • Reactors

  • Robust motor capable of speeds upt to 1000 RPM

    • Outside cylinder rotates at shear rates up to 1700 sec-1, spindle inside remains stationary

  • Available with triple annulus geometry for increased sensitivity when measuring low viscosity fluids

  • Quick and easy setup

  • Complete with choice of spindle (bob), cup, Rheovision Software and computer

  • Industrial standards

How It Works
The outer cylinder (sample cup) is driven by a stepper motor at speeds from 0.05 RPM to 1000 RPM. The inner cylinder (bob) contains an RTD probe on the surface to provide temperature measurement where the shear stress is being measured. Several cup and bob designs with different geometries are available to suit various applications.
The unique torque tube design enables the instrument to respond to minute changes in viscosity, mechanically transmitting a rotational torque signal out of the pressure containment area without friction. Thus all electronics, bearings, and other sensitive components are completely protected from the influences of both the sample fluid and its vapor.

System Includes:

  • Rheometer sensing unit and power base

  • Over-pressure relief valve

  • Choice of 1 cup and spindle (bob) geometry set (B1, B2, B5 cylinders)

  • Desktop computer (PC)

  • Rheovision® software

Options:

  • Heating/Cooling bath, controlled by Rheovision® software

  • Lap-top computer

  • Extra geometry sets (including high sensitivity triple annulus geometries)

SPINDLE
SAMPLE
CUP
VISCOSITY
RANGE
cP (mpa·s)
SHEAR RATE
(sec-1)
SAMPLE VOLUME
(mL)
VAPOR VOLUME
(mL)
PVS-B1-D
(PVS-B1-D-HC)*
1.7 - 3.45
1.703 N
23
90
PVS-B2-D
(PVS-B2-D-HC)*
18.1 -36.3 MM
0.377 N
53
90
PVS-B5-D
(PVS-B5-D-HC)*
4.4 - 8.8 MM
0.85 N
40
90
PVS-TAB1-D
0.5 - 1.03 MM
1.0 N
140
200
PVS-TA5B5-D
(PVS-TAB5B5-HC)*
0.6 - 1.2 MM
0.85
140
200


MM = 1,000,000   N = RPM    *Optional Spindle/Sample Cup in Hastelloy C